- Xcos

Scilab Website | Contribute with GitLab | Mailing list archives | ATOMS toolboxes

Scilab Online Help
5.3.0 - 日本語

Scilab 5.3.0

Change language to:
English - Français - Português

Please note that the recommended version of Scilab is 2025.0.0. This page might be outdated.
See the recommended documentation of this function

Scilab manual >> xcos

xcos

Batch functions
- lincos — xcosダイアグラムにより記述された一般的な動的システムから線形化により定義された線形状態空間モデル
- scicos — OBSOLETE - see xcos
- scicos_simulate — シミュレーションをバッチモードで実行する関数
- scicosim — xcos (バッチ) シミュレーション関数
- steadycos — xcosダイアグラムで記述された一般の動的システムの状態変数の定常値を見つける
palettes
- Annotations palette
  - Annotations_pal — Annotations palette
  - TEXT_f — Text
- Commonly used blocks palette
  - Commonlyusedblocks_pal — Commonly used blocks palette
  - LOGICAL_OP — Logical operation
  - RELATIONALOP — Relational operation
- Continuous time systems palette
  - Continuous_pal — Continuous time systems palette
  - CLINDUMMY_f — Dummy
  - CLR — Continuous transfer function
  - CLSS — Continuous state-space system
  - DERIV — Derivative
  - INTEGRAL_f — Integration
  - INTEGRAL_m — Integration
  - PID — PID regulator
  - TCLSS — Continuous linear system with jump
  - TIME_DELAY — Time delay
  - VARIABLE_DELAY — Variable delay
- Demonstrations blocks palette
  - Demonstrationsblocks_pal — Demonstrations blocks palette
  - AUTOMAT — automata (finite state machine)
  - BOUNCE — Balls coordinates generator
  - BOUNCEXY — Balls viewer
  - BPLATFORM — Balls under a platform viewer
  - PDE — 1D PDE block
- Discontinuities palette
  - discontinuities_pal — discontinuities palette
  - BACKLASH — Backlash
  - DEADBAND — Deadband
  - HYSTHERESIS — Hystheresis
  - RATELIMITER — Rate limiter
  - SATURATION — Saturation
- Discrete time systems palette
  - Discrete_pal — Discrete time systems palette
  - DELAYV_f — Variable delay
  - DELAY_f — Discrete time delay
  - DLR — Discrete transfer function
  - DLRADAPT_f — Discrete Zero-Pole
  - DLSS — Discrete state-space system
  - DOLLAR_f — Delay operator
  - REGISTER — Shift Register
- Electrical palette
  - Electrical_pal — Electrical palette
  - CCS — Controllable Modelica current source
  - CVS — Controllable Modelica voltage source
  - Capacitor — Electrical capacitor
  - ConstantVoltage — Electrical DC voltage source
  - CurrentSensor — Electrical current sensor
  - Diode — Electrical diode
  - Ground — Ground (zero potential reference)
  - Gyrator — Modelica Gyrator
  - IdealTransformer — Ideal Transformer
  - Inductor — Electrical inductor
  - NMOS — Simple NMOS Transistor
  - NPN — NPN transistor
  - OpAmp — Ideal opamp (norator-nullator pair)
  - PMOS — Simple PMOS Transistor
  - PNP — PNP transistor
  - PotentialSensor — Potential sensor
  - Resistor — Electrical resistor
  - SineVoltage — Sine voltage source
  - Switch — Non-ideal electrical switch
  - VVsourceAC — Variable AC voltage source
  - VariableResistor — Electrical variable resistor
  - VoltageSensor — Electrical voltage sensor
  - VsourceAC — Electrical AC voltage source
- Event handling palette
  - Events_pal — Event handling palette
  - ANDBLK — Activation and
  - ANDLOG_f — Logical and
  - CEVENTSCOPE — Activation scope
  - CLKFROM — Receives data from a corresponding CLKGOTO
  - CLKGOTO — Pass block input to CLKFROM block
  - CLKGotoTagVisibility — Define Scope of CLKGOTO tag visibility
  - CLKOUTV_f — Output activation port
  - CLKSOMV_f — Activation union
  - EDGE_TRIGGER — EDGE_TRIGGER block
  - ESELECT_f — Synchronous block Event-Select
  - EVTDLY_c — Event delay
  - EVTGEN_f — Event generator
  - EVTVARDLY — Event variable delay
  - Extract_Activation — Extract_Activation block
  - HALT_f — Halt
  - IFTHEL_f — Synchronous block If-Then-Else
  - MCLOCK_f — MCLOCK_f title
  - MFCLCK_f — MFCLCK_f title
  - M_freq — Multiple Frequencies
  - freq_div — Frequency division
- Implicit palette
  - Implicit_pal — Implicit palette
  - CONSTRAINT_f — Constraint
  - DIFF_f — Derivative
- Integer palette
  - Integer_pal — Integer palette
  - BITCLEAR — Clear a Bit
  - BITSET — Set a Bit
  - CONVERT — Data Type Conversion
  - DFLIPFLOP — D flip-flop
  - DLATCH — D latch flip-flop
  - EXTRACTBITS — EXTRACTBITS
  - INTMUL — Integer matrix multiplication
  - JKFLIPFLOP — JK flip-flop
  - LOGIC — Combinational Logic
  - SHIFT — Shift Bits
  - SRFLIPFLOP — SR flip-flop
- Lookup tables palette
  - Lookuptables_pal — Lookup tables palette
  - INTRP2BLK_f — 2D interpolation
  - INTRPLBLK_f — Interpolation
  - LOOKUP_f — Lookup table
- Math operations palette
  - Mathoperations_pal — Math operations palette
  - ABS_VALUE — Absolute value
  - BIGSOM_f — Sum
  - COSBLK_f — COSBLK
  - EXPBLK_m — Exponential
  - GAINBLK_f — Gain
  - INVBLK — Inverse
  - LOGBLK_f — Log
  - MATMAGPHI — Complex to Magnitude and Angle Conversion
  - MATZREIM — Complex decomposition
  - MAXMIN — Max and Min
  - MAX_f — MAX
  - MIN_f — MIN
  - POWBLK_f — Power
  - PRODUCT — Product
  - PROD_f — Multiplication
  - SIGNUM — Signum
  - SINBLK_f — SINBLK
  - SQRT — Square root
  - SUMMATION — Matrix Summation
  - SUM_f — Addition
  - TANBLK_f — TANBLK
  - TrigFun — Trigonometric function
- Matrix operation palette
  - Matrix_pal — Matrix operation palette
  - CUMSUM_blk — Cumulative Sum
  - EXTRACT — Matrix Extractor
  - EXTTRI — Triangular or Diagonal extraction
  - MATBKSL — left matrix division
  - MATCATH — Horizontal Concatenation
  - MATCATV — Vertical Concatenation
  - MATDET — Matrix Determinant
  - MATDIAG — Create Diagonal Matrix
  - MATDIV — Matrix division
  - MATEIG — Matrix Eigenvalues
  - MATEXPM — Matrix Exponential
  - MATINV — Matrix Inverse
  - MATLU — LU Factorization
  - MATMUL — Matrix Multiplication
  - MATPINV — Matrix PseudoInverse
  - MATRESH — Matrix Reshape
  - MATSING — SVD decomposition
  - MATSUM — Matrix Sum
  - MATTRAN — Matrix Transpose
  - MATZCONJ — Matrix Conjugate
  - RICC_blk — Riccati Equation
  - ROOTCOEF — Coefficient computation
  - SUBMAT — Sub-matrix extraction
- Port & Subsystem palette
  - Portaction_pal — Port & Subsystem palette
  - IN_f — Input Port
  - OUTIMPL_f — Output implicit port
  - OUT_f — Output Port
- Signal processing palette
  - Signalprocessing_pal — Signal processing palette
  - QUANT_f — Quantization
  - SAMPHOLD_m — Sample and hold
- Signal routing palette
  - Signalrouting_pal — Signal routing palette
  - DEMUX — Demultiplexer
  - EXTRACTOR — Extractor
  - FROM — FROM Receives data from a corresponding GOTO
  - FROMMO — Receives data from a corresponding GOTOMO
  - GOTO — GOTO Pass block input to From block
  - GOTOMO — Pass block input to FROMMO block
  - GotoTagVisibility — Define Scope of GOTO tag visibility
  - GotoTagVisibilityMO — Define Scope of GOTOMO tag visibility
  - ISELECT_m — Iselect
  - MUX — Multiplexer
  - M_SWITCH — Multi-port switch
  - NRMSOM_f — Merge data
  - RELAY_f — Relay
  - SELECT_m — Select
  - SWITCH2_m — Switch2
  - SWITCH_f — Switch
- Sinks palette
  - Sinks_pal — Sinks palette
  - AFFICH_m — Display
  - CANIMXY — y=f(x) animated viewer
  - CANIMXY3D — z=f(x,y) animated viewer
  - CFSCOPE — Floating point scope
  - CMAT3D — Matrix z values 3D viewer
  - CMATVIEW — Matrix Colormapped viewer
  - CMSCOPE — Multi display scope
  - CSCOPE — Single Display Scope
  - CSCOPXY — y=f(x) permanent viewer
  - CSCOPXY3D — z=f(x,y) permanent viewer
  - ENDBLK — END block
  - END_c — END_c block
  - TOWS_c — Data to Scilab worspace
  - TRASH_f — Trash block
  - WFILE_f — Write to file
  - WRITEAU_f — Write AU sound file
  - WRITEC_f — Write binary data
- Sources palette
  - Sources_pal — Sources palette
  - CLKINV_f — Input activation port
  - CLOCK_c — Activation clock
  - CONST_m — Constant
  - CURV_f — Curve
  - Counter — Counter
  - FROMWSB — Data from Scilab workspace to Xcos
  - GENSIN_f — Sin generator
  - GENSQR_f — Square wave generator
  - INIMPL_f — Input implicit port
  - Modulo_Count — Modulo counter
  - RAMP — Ramp
  - RAND_m — Random generator
  - READAU_f — Read AU sound file
  - READC_f — Read binary data
  - RFILE_f — Read from file
  - SAWTOOTH_f — Sawtooth generator
  - STEP_FUNCTION — Step function generator
  - SampleCLK — Sample Time Clock
  - Sigbuilder — Signal creator/generator
  - TIME_f — Time
  - TKSCALE — Adjust constant value with a tk widget
- Thermohydraulics palette
  - ThermoHydraulics_pal — Thermal-Hydraulics toolbox
  - Bache — Thermal-hydraulic tank (reservoir)
  - PerteDP — Thermal-hydraulic pipe
  - PuitsP — Thermal-hydraulic drain (well)
  - SourceP — Thermal-hydraulic constant pressure source
  - VanneReglante — Thermal-hydraulic control valve
- User defined functions palette
  - Userdefinedfunctions_pal — User defined functions palette
  - CBLOCK — New C
  - DSUPER — Masked super block
  - EXPRESSION — Mathematical expression
  - MBLOCK — Modelica generic block
  - SUPER_f — Super block
  - c_block — C language
  - fortran_block — Fortran
  - generic_block3 — Generic block
  - scifunc_block_m — Scilab function block
- Zero crossing detection palette
  - Zerocrossingdetection_pal — Zero crossing detection palette
  - GENERAL_f — GENERAL_f title
  - NEGTOPOS_f — Threshold negative to positive
  - POSTONEG_f — Threshold positive to negative
  - ZCROSS_f — Threshold detection at zero
Programming xcos Blocks
- C Computational Functions
  - C_macros — Utilities C macros
  - C_struct — C Block structure of a computational function
  - C_utils — Utilities C functions
- Scilab Computational Functions
  - sci_struct — Scicos block structure of a scilab computational function
- Utilities Functions
  - curblock — Return the current called xcos block during the simulation
  - getblocklabel — Get the label of a scicos block
  - getscicosvars — Supervisor utility function
  - phase_simulation — Get the current simulation phase
  - pointer_xproperty — Get the type of a continuous time state variable
  - scicos_time — Returns the current time during simulation
  - set_blockerror — set the block error number
  - set_xproperty — Set the type of a continuous time state variable
Scilab Data Structures
- Blocks
  - scicos_block — Define a block structure
  - scicos_graphics — Define a graphics structure
  - scicos_model — Define a model structure
- Compilation/Simulation
  - scicos_cpr — Compiled Scicos structure
  - scicos_sim — Define a sim structure
  - scicos_state — Define a state structure
- Diagram
  - scicos_diagram — Define a scs_m structure
  - scicos_params — Define a param structure
- Links
  - scicos_link — Define a link structure
Scilab Utilities Functions
- buildouttb — Build of the sublist %cpr.state.outtb
- create_palette — Palette generator
- getModelicaPath — Get the Modelica directory path needed by Xcos diagram containing Modelica blocks
- get_scicos_version — Get the current Scicos version
- importXcosDiagram — Import an Xcos diagram on Scilab
- scicos_debug — Set the level of the Scicos debugging
- var2vec — Transform a scilab variable in a vector of double
- vec2var — Transform a vector of double in a scilab variable
- xcosPal — Instanciate a new Xcos palette on Scilab.
- xcosPalAdd — Add a palette to the Scilab/Xcos palette manager. Optional property can be added to set the category of the palette.
- xcosPalAddBlock — Add a block to a Scilab/Xcos palette instance. Some optional properties can be added to customize the palette icon and the style of the block.
- xcosPalExport — Export a palette instance to a path.
xcos — ハイブリッドシミュレータ用のブロック図エディタおよびGUI
xcos_menu_entries — エディタのメニューエントリ

<< Output functions

Scilab manual

Spreadsheet >>

Copyright (c) 2022-2024 (Dassault Systèmes)
Copyright (c) 2017-2022 (ESI Group)
Copyright (c) 2011-2017 (Scilab Enterprises)
Copyright (c) 1989-2012 (INRIA)
Copyright (c) 1989-2007 (ENPC)
with contributors

Last updated:
Wed Jan 26 16:25:14 CET 2011