Scilab-Branch-6.1-GIT
Please note that the recommended version of Scilab is 2025.0.0. This page might be outdated.
See the recommended documentation of this function
palettes
- Annotations palette
- Annotations_pal — Annotations palette
- TEXT_f — Free annotation
- Commonlyusedblocks_pal
- Commonlyusedblocks_pal — Commonly used blocks palette
- LOGICAL_OP — Logical operation
- RELATIONALOP — Relational operation
- Continuous_pal
- Continuous_pal — Continuous time systems palette
- CLINDUMMY_f — Dummy
- CLR — Continuous transfer function
- CLSS — Continuous state-space system
- DERIV — Derivative
- INTEGRAL_f — Integration
- INTEGRAL_m — Integration
- PID — PID regulator
- TCLSS — Continuous linear system with jump
- TIME_DELAY — Time delay
- VARIABLE_DELAY — Variable delay
- Demonstrationsblocks_pal
- Discontinuities_pal
- discontinuities_pal — discontinuities palette
- BACKLASH — Backlash
- DEADBAND — Deadband
- HYSTHERESIS — Hystheresis
- RATELIMITER — Rate limiter
- SATURATION — Saturation
- Discrete_pal
- Discrete_pal — Discrete time systems palette
- DELAY_f — Discrete time delay
- DELAYV_f — Variable delay
- DLR — Discrete transfer function
- DLRADAPT_f — Discrete Zero-Pole
- DLSS — Discrete state-space system
- DOLLAR_f — Delay operator
- REGISTER — Shift Register
- Electrical_pal
- Electrical_pal — Electrical palette
- Capacitor — Electrical capacitor
- CCS — Controllable Modelica current source
- ConstantVoltage — Electrical DC voltage source
- CurrentSensor — Electrical current sensor
- CVS — Controllable Modelica voltage source
- Diode — Electrical diode
- Ground — Ground (zero potential reference)
- Gyrator — Modelica Gyrator
- IdealTransformer — Ideal Transformer
- Inductor — Electrical inductor
- NMOS — Simple NMOS Transistor
- NPN — NPN transistor
- OpAmp — Ideal opamp (norator-nullator pair)
- PMOS — Simple PMOS Transistor
- PNP — PNP transistor
- PotentialSensor — Potential sensor
- Resistor — Electrical resistor
- SineVoltage — Sine voltage source
- Switch — Non-ideal electrical switch
- VariableResistor — Electrical variable resistor
- VoltageSensor — Electrical voltage sensor
- VsourceAC — Electrical AC voltage source
- VVsourceAC — Variable AC voltage source
- Events_pal
- Events_pal — Event handling palette
- ANDBLK — Activation and
- ANDLOG_f — Logical AND
- CEVENTSCOPE — Activation scope
- CLKFROM — Receives data from a corresponding CLKGOTO
- CLKGOTO — Send input events to the corresponding CLKFROM block
- CLKGotoTagVisibility — Define Scope of CLKGOTO tag visibility
- CLKSOMV_f — Activation union
- EDGE_TRIGGER — generate an event when the input signal sign changes
- ESELECT_f — Synchronous block Event-Select
- EVTDLY_c — Event delay
- EVTGEN_f — Event generator
- EVTVARDLY — Event variable delay
- Extract_Activation — Extract_Activation block
- freq_div — Frequency division
- HALT_f — Pause the simulation at an input event
- IFTHEL_f — Synchronous block If-Then-Else
- M_freq — Multiple Frequencies
- MCLOCK_f — double clock at two multiple output frequencies
- MFCLCK_f — triggered double clock with two output frequencies
- VirtualCLK0 — Triggers always active blocks in a superblock
- Implicit_pal
- Implicit_pal — Implicit palette
- CONSTRAINT_c — Constraint
- DIFF_f — Derivative
- Integer_pal
- Integer_pal — Integer palette
- BITCLEAR — Clear a Bit
- BITSET — Set a Bit
- CONVERT — Data Type Conversion
- DFLIPFLOP — D flip-flop
- DLATCH — D latch flip-flop
- EXTRACTBITS — Bits Extraction
- INTMUL — Integer matrix multiplication
- JKFLIPFLOP — JK flip-flop
- LOGIC — Combinatorial Logic
- SHIFT — Shift/Rotates Bits
- SRFLIPFLOP — SR flip-flop
- Lookuptables_pal
- Lookuptables_pal — Lookup tables palette
- INTRP2BLK_f — 2D interpolation
- INTRPLBLK_f — Linear interpolation
- LOOKUP_f — Lookup table
- Mathoperations_pal
- Mathoperations_pal — Math operations palette
- ABS_VALUE — Absolute value
- BIGSOM_f — Scalar or vector Addition/Soustraction
- COSBLK_f — Cosine
- EXPBLK_m — Exponential of a scalar
- EXPRESSION — Mathematical expression
- GAINBLK_f — Gain
- INVBLK — Inverse
- LOGBLK_f — Logarithm
- MATMAGPHI — Complex from/to Magnitude and Angle Conversion
- MATZREIM — Complex decomposition/composition
- MAX_f — Maximum value of a vector's elements
- MAXMIN — Max or min value of a vector, or element-wise for N vectors
- MIN_f — Minimum value of a vector's elements
- POWBLK_f — Array power
- PROD_f — Element-wise product
- PRODUCT — Element-wise vector multiplication/division
- SIGNUM — Sign
- SINBLK_f — Sine
- SQRT — Square root
- SUM_f — Addition
- SUMMATION — Matrix Addition/Subtraction
- TANBLK_f — Tangent
- TrigFun — Trigonometric function
- Matrix_pal
- Matrix_pal — Matrix operation palette
- CUMSUM — Cumulative Sum
- EXTRACT — Matrix extractor
- EXTTRI — Triangular or Diagonal Extraction
- MATBKSL — Left matrix division
- MATCATH — Horizontal Concatenation
- MATCATV — Vertical Concatenation
- MATDET — Matrix Determinant
- MATDIAG — Create Diagonal Matrix
- MATDIV — Matrix division
- MATEIG — Matrix Eigenvalues
- MATEXPM — Matrix Exponential
- MATINV — Matrix Inverse
- MATLU — LU Factorization
- MATMUL — Matrix Multiplication
- MATPINV — Matrix PseudoInverse
- MATRESH — Matrix Reshape
- MATSING — SVD Decomposition
- MATSUM — Sum of Matrix's Elements
- MATTRAN — Matrix Transpose
- MATZCONJ — Conjugate of Matrix's Elements
- RICC — Riccati Equation
- ROOTCOEF — Polynomial Coefficient Computation
- SUBMAT — Sub-matrix Extraction
- Portaction_pal
- Signalprocessing_pal
- Signalprocessing_pal — Signal processing palette
- QUANT_f — Quantization
- SAMPHOLD_m — Sample and hold
- Signalrouting_pal
- Signalrouting_pal — Signal routing palette
- DEMUX — Demultiplexer
- EXTRACTOR — Extractor
- FROM — receives data from a corresponding GOTO
- FROMMO — Receives data from a corresponding GOTOMO
- GOTO — Send input data to the corresponding FROM block
- GOTOMO — Pass block input to FROMMO block
- GotoTagVisibility — Define Scope of GOTO tag visibility
- GotoTagVisibilityMO — Define Scope of GOTOMO tag visibility
- ISELECT_m — Iselect
- M_SWITCH — Multi-port switch
- MUX — Multiplexer
- NRMSOM_f — Merge data
- RELAY_f — Relay
- SELECT_m — Select
- SELF_SWITCH — Switch
- SWITCH2_m — Switch2
- SWITCH_f — Switch
- Sinks_pal
- Sinks_pal — Sinks palette
- AFFICH_m — Display input numbers on the block's icon
- BARXY — y=f(x) animated viewer
- CANIMXY — y=f(x) animated viewer
- CANIMXY3D — z=f(x,y) animated viewer
- CFSCOPE — Floating point scope
- CMAT3D — Matrix z values 3D viewer
- CMATVIEW — Matrix Colormapped viewer
- CMSCOPE — Multi display scope in subplot(N,1)
- CSCOPE — Single Display Scope
- CSCOPXY — y = f(x) permanent viewer
- CSCOPXY3D — z = f(x,y) permanent viewer
- END_c — END_c block
- ENDBLK — END block
- SCALE_CMSCOPE — Multi display scope with autoscale feature of graph
- SCALE_CSCOPE — Single Display Scope with autoscale feature of graph
- TOWS_c — Data to Scilab workspace
- TRASH_f — Trash block
- WRITEAU_f — Write AU sound file
- WRITEC_f — Write to C binary file
- Sources_pal
- Sources_pal — Sources palette
- CLOCK_c — Activation clock
- CONST_m — Constant
- Counter — Counter
- CURV_f — Curve
- FROMWSB — Data from Scilab workspace to Xcos
- GENSIN_f — Sine wave generator
- GENSQR_f — Square wave generator
- Modulo_Count — Modulo counter (0 to N counter)
- PULSE_SC — Pulse Generator
- RAMP — Ramp
- RAND_m — Random generator
- READAU_f — Read AU sound file
- READC_f — Read binary data
- RFILE_f — Read from input file
- SampleCLK — Sample Time Clock
- SAWTOOTH_f — Sawtooth generator
- Sigbuilder — Signal creator/generator
- STEP_FUNCTION — Step Function
- TIME_f — Time
- TKSCALE — Adjust value with a graphical widget.
- Thermohydraulics_pal
- ThermoHydraulics_pal — Thermal-Hydraulics toolbox
- Bache — Thermal-hydraulic tank (reservoir)
- Flowmeter — Thermal-hydraulic Flow sensor
- PerteDP — Thermal-hydraulic pipe
- PuitsP — Thermal-hydraulic drain (well)
- SourceP — Thermal-hydraulic constant pressure source
- VanneReglante — Thermal-hydraulic control valve
- Userdefinedfunctions_pal
- Userdefinedfunctions_pal — User defined functions palette
- c_block — C language
- CBLOCK — New C
- DEBUG — Debug the simulation
- DSUPER — Masked super block
- fortran_block — Fortran
- generic_block3 — Generic block
- MBLOCK — Modelica generic block
- scifunc_block_m — Scilab function block
- SUPER_f — Super block
- Zerocrossingdetection_pal
- Zerocrossingdetection_pal — Zero crossing detection palette
- GENERAL_f — GENERAL_f title
- NEGTOPOS_f — Threshold negative to positive
- POSTONEG_f — Threshold positive to negative
- ZCROSS_f — Threshold detection at zero
| Report an issue | ||
| << batch_functions | Xcos | programming_scicos_blocks >> |