- Xcos

Scilab Website | Contribute with GitLab | Mailing list archives | ATOMS toolboxes

Scilab Online Help
5.4.0 - Français

Scilab 5.4.0

Change language to:
English - 日本語 - Português - Русский

Please note that the recommended version of Scilab is 2025.0.0. This page might be outdated.
See the recommended documentation of this function

Aide Scilab >> Xcos

Xcos

palettes
- Palette Annotations
  - Annotations_pal — Palette Annotations
  - TEXT_f — Annotation libre
- Palette Blocs couramment utilisés
  - Commonlyusedblocks_pal — Palette Blocs couramment utilisés
  - LOGICAL_OP — Opération logique
  - RELATIONALOP — Opération Relationnelle
- Palette Systèmes à temps continu
  - Continuous_pal — Palette Systèmes à temps continu
  - CLINDUMMY_f — Dummy (Factice)
  - CLR — Fonction de transfert continue
  - CLSS — Représentation d'état en temps continu
  - DERIV — Dérivée
  - INTEGRAL_f — Intégration
  - INTEGRAL_m — Intégration
  - PID — Régulateur PID
  - TCLSS — Système continu linéaire avec saut
  - TIME_DELAY — Retard pur
  - VARIABLE_DELAY — Retard pur variable
- Palette Fonctions discontinues
  - discontinuities_pal — Palette Fonctions discontinues
  - BACKLASH — Backlash (jeu)
  - DEADBAND — Zone morte
  - HYSTHERESIS — Hystérèsis (relais)
  - RATELIMITER — Limitation de vitesse
  - SATURATION — Saturation
- Palette Systèmes à temps discret
  - Discrete_pal — Palette Systèmes à temps discret
  - DELAYV_f — Délai variable
  - DELAY_f — Retard en temps discret
  - DLR — Fonction de transfert discrète
  - DLRADAPT_f — Fonction de transfert discrète (Pôles & zéros)
  - DLSS — Représentation d'état en temps discret
  - DOLLAR_f — Opérateur Retard
  - REGISTER — Registre à décalage
- Palette Electrique
  - Electrical_pal — Palette électrique
  - CCS — Source de courant contrôlable Modelica
  - CVS — Source de tension contrôlable Modelica
  - Capacitor — Capacité électrique
  - ConstantVoltage — Source de tension continue
  - CurrentSensor — Capteur de courant électrique
  - Diode — Diode électrique
  - Ground — Masse (Référence du potentiel zéro)
  - Gyrator — Gyrateur Modelica
  - IdealTransformer — Transformateur idéal
  - Inductor — Inductance électrique
  - NMOS — Transistor NMOS simple
  - NPN — Transistor NPN
  - OpAmp — Amplificateur opérationnel idéal (Paire norator-nullator)
  - PMOS — Transistor PMOS simple
  - PNP — Transistor PNP
  - PotentialSensor — Capteur de tension
  - Resistor — Résistance électrique
  - SineVoltage — Source de tension sinusoïdale
  - Switch — Interrupteur électrique non idéal
  - VVsourceAC — Source de tension variable sinusoïdale
  - VariableResistor — Résistance électrique variable
  - VoltageSensor — Capteur de tension électrique
  - VsourceAC — Source de tension sinusoïdale
- Palette Entier
  - Integer_pal — Palette Entier
  - BITCLEAR — Positionne un bit à 0
  - BITSET — Positionne un bit à 1
  - CONVERT — Conversion de type de données
  - DFLIPFLOP — Bascule D
  - DLATCH — Bascule D transparente
  - EXTRACTBITS — Extraction de bits
  - INTMUL — Multiplication de matrices entières
  - JKFLIPFLOP — Bascule JK
  - LOGIC — Logique combinatoire
  - SHIFT — Décalage/Rotation de bits
  - SRFLIPFLOP — Bascule SR
- Palette Opérations Mathématiques
  - Mathoperations_pal — Palette Opérations mathématiques
  - ABS_VALUE — Valeur absolue
  - BIGSOM_f — Somme
  - COSBLK_f — Cosinus
  - EXPBLK_m — Exponentielle d'un scalaire
  - GAINBLK_f — Gain
  - INVBLK — Inverse
  - LOGBLK_f — Logarithme commun
  - MATMAGPHI — Complexe à partir de/vers module et phase
  - MATZREIM — Composition/décomposition complexe
  - MAXMIN — Valeur maximale ou minimale des éléments de vecteurs
  - MAX_f — Valeur maximale des éléments d'un vecteur
  - MIN_f — Valeur minimale des éléments d'un vecteur
  - POWBLK_f — Puissance d'un tableau
  - PRODUCT — Multiplication/Division de vecteurs élément par élément
  - PROD_f — Produit de vecteurs élément par élément
  - SIGNUM — Signe
  - SINBLK_f — Sinus
  - SQRT — Racine carrée
  - SUMMATION — Addition/Soustraction de matrices
  - SUM_f — Addition
  - TANBLK_f — Tangente
  - TrigFun — Fonction trigonométrique
- Palette Opérations matricielles
  - Matrix_pal — Palette Opérations Matricielles
  - CUMSUM — Somme cumulative
  - EXTRACT — Extraction de matrice
  - EXTTRI — Extraction triangulaire ou diagonale
  - MATBKSL — Division à gauche de matrice
  - MATCATH — Concaténation horizontale
  - MATCATV — Concaténation verticale
  - MATDET — Déterminant de matrice
  - MATDIAG — Création de matrice diagonale
  - MATDIV — Division matricielle
  - MATEIG — Valeurs propres d'une matrice
  - MATEXPM — Exponentielle matricielle
  - MATINV — Matrice inverse
  - MATLU — Factorisation LU
  - MATMUL — Multiplication de matrice
  - MATPINV — Pseudo-inverse de matrice
  - MATRESH — Remise en forme de matrice
  - MATSING — Décomposition en valeurs singulières (SVD)
  - MATSUM — Somme des éléments d'une matrice
  - MATTRAN — Transposée de matrice
  - MATZCONJ — Conjuguée des éléments d'une matrice
  - RICC — Equation de Riccati
  - ROOTCOEF — Calcul des coefficients d'un polynôme
  - SUBMAT — Extraction de sous-matrice
- Palette Port & Sous-systèmes
  - Portaction_pal — Palette Port & Sous-systèmes
  - CLKINV_f — Port d'entrée d'activation
  - CLKOUTV_f — Port de sortie d'activation
  - INIMPL_f — Port d'entrée implicite
  - IN_f — Port d'entrée régulier
  - OUTIMPL_f — Port de sortie implicite
  - OUT_f — Port de sortie régulier
- Sinks palette
  - WFILE_f — Ecriture dans un fichier
  - WRITEC_f — Ecriture dans une fichier binaire C
  - Sinks_pal — Sinks palette
  - AFFICH_m — Display
  - BARXY — y=f(x) animated viewer
  - CANIMXY — y=f(x) animated viewer
  - CANIMXY3D — z=f(x,y) animated viewer
  - CFSCOPE — Floating point scope
  - CMAT3D — Matrix z values 3D viewer
  - CMATVIEW — Matrix Colormapped viewer
  - CMSCOPE — Multi display scope
  - CSCOPE — Single Display Scope
  - CSCOPXY — y=f(x) permanent viewer
  - CSCOPXY3D — z=f(x,y) permanent viewer
  - ENDBLK — END block
  - END_c — END_c block
  - TOWS_c — Data to Scilab worspace
  - TRASH_f — Trash block
  - WRITEAU_f — Write AU sound file
- Palette Sources
  - Sources_pal — Palette Sources
  - RFILE_f — Lecture dans un fichier
  - CLOCK_c — Activation clock
  - CONST_m — Constant
  - CURV_f — Curve
  - Counter — Counter
  - FROMWSB — Data from Scilab workspace to Xcos
  - GENSIN_f — Sine wave generator
  - GENSQR_f — Square wave generator
  - Modulo_Count — Modulo counter (0 to N counter)
  - PULSE_SC — Pulse Generator
  - RAMP — Ramp
  - RAND_m — Random generator
  - READAU_f — Read AU sound file
  - READC_f — Read binary data
  - SAWTOOTH_f — Sawtooth generator
  - STEP_FUNCTION — Step Function
  - SampleCLK — Sample Time Clock
  - Sigbuilder — Signal creator/generator
  - TIME_f — Time
  - TKSCALE — Adjust value with a graphical widget.
- Demonstrations blocks palette
  - Demonstrationsblocks_pal — Demonstrations blocks palette
  - AUTOMAT — automata (finite state machine)
  - BOUNCE — Balls coordinates generator
  - BOUNCEXY — Balls viewer
  - BPLATFORM — Balls under a platform viewer
  - PDE — 1D PDE block
- Event handling palette
  - Events_pal — Event handling palette
  - ANDBLK — Activation and
  - ANDLOG_f — Logical and
  - CEVENTSCOPE — Activation scope
  - CLKFROM — Receives data from a corresponding CLKGOTO
  - CLKGOTO — Pass block input to CLKFROM block
  - CLKGotoTagVisibility — Define Scope of CLKGOTO tag visibility
  - CLKSOMV_f — Activation union
  - EDGE_TRIGGER — EDGE_TRIGGER block
  - ESELECT_f — Synchronous block Event-Select
  - EVTDLY_c — Event delay
  - EVTGEN_f — Event generator
  - EVTVARDLY — Event variable delay
  - Extract_Activation — Extract_Activation block
  - HALT_f — Halt
  - IFTHEL_f — Synchronous block If-Then-Else
  - MCLOCK_f — MCLOCK_f title
  - MFCLCK_f — MFCLCK_f title
  - M_freq — Multiple Frequencies
  - VirtualCLK0 — Triggered Always Active Blocks
  - freq_div — Frequency division
- Implicit palette
  - Implicit_pal — Implicit palette
  - CONSTRAINT_c — Constraint
  - DIFF_f — Derivative
- Lookup tables palette
  - Lookuptables_pal — Lookup tables palette
  - INTRP2BLK_f — 2D interpolation
  - INTRPLBLK_f — Interpolation
  - LOOKUP_f — Lookup table
- Signal processing palette
  - Signalprocessing_pal — Signal processing palette
  - QUANT_f — Quantization
  - SAMPHOLD_m — Sample and hold
- Signal routing palette
  - Signalrouting_pal — Signal routing palette
  - DEMUX — Demultiplexer
  - EXTRACTOR — Extractor
  - FROM — FROM Receives data from a corresponding GOTO
  - FROMMO — Receives data from a corresponding GOTOMO
  - GOTO — GOTO Pass block input to From block
  - GOTOMO — Pass block input to FROMMO block
  - GotoTagVisibility — Define Scope of GOTO tag visibility
  - GotoTagVisibilityMO — Define Scope of GOTOMO tag visibility
  - ISELECT_m — Iselect
  - MUX — Multiplexer
  - M_SWITCH — Multi-port switch
  - NRMSOM_f — Merge data
  - RELAY_f — Relay
  - SELECT_m — Select
  - SELF_SWITCH — Switch
  - SWITCH2_m — Switch2
  - SWITCH_f — Switch
- Thermohydraulics palette
  - ThermoHydraulics_pal — Thermal-Hydraulics toolbox
  - Bache — Thermal-hydraulic tank (reservoir)
  - PerteDP — Thermal-hydraulic pipe
  - PuitsP — Thermal-hydraulic drain (well)
  - SourceP — Thermal-hydraulic constant pressure source
  - VanneReglante — Thermal-hydraulic control valve
- User defined functions palette
  - Userdefinedfunctions_pal — User defined functions palette
  - CBLOCK — New C
  - DSUPER — Masked super block
  - EXPRESSION — Mathematical expression
  - MBLOCK — Modelica generic block
  - SUPER_f — Super block
  - c_block — C language
  - fortran_block — Fortran
  - generic_block3 — Generic block
  - scifunc_block_m — Scilab function block
- Zero crossing detection palette
  - Zerocrossingdetection_pal — Zero crossing detection palette
  - GENERAL_f — GENERAL_f title
  - NEGTOPOS_f — Threshold negative to positive
  - POSTONEG_f — Threshold positive to negative
  - ZCROSS_f — Threshold detection at zero
Fonctions utilitaires Scilab
- block_parameter_error — Affiche une boîte d'erreur de saisie de paramètre pour un bloc Xcos.
- buildouttb — Build of the sublist %cpr.state.outtb
- create_palette — Palette generator
- getModelicaPath — Get the Modelica directory path needed by Xcos diagram containing Modelica blocks
- get_scicos_version — Get the current Scicos version
- importXcosDiagram — Import an Xcos diagram on Scilab
- loadScicos — Load the Xcos simulation native library.
- loadXcosLibs — Load most of the Xcos macros
- scicos_debug — Set the level of the Scicos debugging
- scicos_getvalue — xwindow dialog for Xcos
- standard_inputs — Get the position of the input ports of a block in Xcos editor.
- standard_origin — Get the position of a block in the Xcos editor.
- standard_outputs — Get the position of the output ports of a block in Xcos editor.
- var2vec — Transform a scilab variable in a vector of double
- vec2var — Transform a vector of double in a scilab variable
- xcosPal — Instanciate a new Xcos palette on Scilab.
- xcosPalAdd — Add a palette to the Scilab/Xcos palette manager. Optional property can be added to set the category of the palette.
- xcosPalAddBlock — Add a block to a Scilab/Xcos palette instance. Some optional properties can be added to customize the palette icon and the style of the block.
- xcosPalExport — Export a palette instance to a path.
Batch functions
- lincos — Constructs by linearization a linear state-space model from a general dynamical system described by a xcos diagram
- scicos — OBSOLETE - see xcos
- scicos_simulate — Function for running xcos simulation in batch mode
- scicosim — xcos (batch) simulation function
- steadycos — Finds an equilibrium state of a general dynamical system described by a xcos diagram
- xcosValidateBlockSet — Function to validate Xcos Block interface function.
- xcosValidateCompareBlock — Function to compare two Xcos Blocks.
- xcos_simulate — Function for running xcos simulation in batch mode
Programming xcos Blocks
- C Computational Functions
  - C_macros — Utilities C macros
  - C_struct — C Block structure of a computational function
  - C_utils — Utilities C functions
- Scilab Computational Functions
  - sci_struct — Scicos block structure of a scilab computational function
- Utilities Functions
  - curblock — Return the current called xcos block during the simulation
  - getblocklabel — Get the label of a scicos block
  - getscicosvars — Supervisor utility function
  - phase_simulation — Get the current simulation phase
  - pointer_xproperty — Get the type of a continuous time state variable
  - scicos_time — Returns the current time during simulation
  - set_blockerror — set the block error number
  - set_xproperty — Set the type of a continuous time state variable
Scilab/Xcos Data Structures
- Blocks
  - scicos_block — Define a block structure
  - scicos_graphics — Define a graphics structure
  - scicos_model — Define a model structure
- Compilation/Simulation
  - scicos_cpr — Compiled Scicos structure
  - scicos_sim — Define a sim structure
  - scicos_state — Define a state structure
- Diagram
  - scicos_diagram — Define a scs_m structure
  - scicos_params — Define a param structure
- Links
  - scicos_link — Define a link structure
xcos — Editeur de schéma-bloc et IHM pour le simulateur hybride
xcos_menu_entries — Entrées de menu de l'éditeur Xcos

Report an issue
<< Sorties	Aide Scilab	Tableur >>

Copyright (c) 2022-2024 (Dassault Systèmes)
Copyright (c) 2017-2022 (ESI Group)
Copyright (c) 2011-2017 (Scilab Enterprises)
Copyright (c) 1989-2012 (INRIA)
Copyright (c) 1989-2007 (ENPC)
with contributors

Last updated:
Mon Oct 01 17:37:27 CEST 2012