INIMPL_f

Block Screenshot

Contents

• Description
• Parameters
• Default properties
• Example
• Interfacing function
• See also

Description

This block represent an implicit input port. It must only be used inside a Xcos Super Block and be connected to an implicit input in the subsystem.

This block is a signal link from outside of a system into a sub-system. In a Super Block, the implicit's input ports must be numbered from 1 to the total number of implicit's input ports. You can set it with the Port number parameter.

Parameters

• Port number

  Specify the port number of the input port.

  Properties : Type 'vec' of size 1.

Default properties

• always active: no

• direct-feedthrough: no

• zero-crossing: no

• mode: no

• regular outputs:

  - port 1 : size [-1,1] / type 1

• number/sizes of activation inputs: 0

• number/sizes of activation outputs: 0

• continuous-time state: no

• discrete-time state: no

• object discrete-time state: no

• name of computational function: inimpl

Example

The following example shows the use of the INIMPL_f block. The Super block contains a simple electrical circuit with two inputs, one on the resistor and the other for the ground. These inputs are connected to the external environment of the bloc via two INIMPL_f blocks numbered 1 and 2. The Super block output is connected via a OUTIMPL_f block.

The following figure shows the output of the bloc :

Interfacing function

• SCI/modules/scicos_blocks/macros/Sources/INIMPL_f.sci

See also

• OUTIMPL_f — Output implicit port
• SUPER_f — Super block