Please note that the recommended version of Scilab is 2025.0.0. This page might be outdated.

See the recommended documentation of this function

# Rootfinding

This feature finds roots of continuous functions for Zero-crossing Blocks.

### Description

Some problems require zero crossing detection of continuous functions (for instance, regulation systems), also named *rootfinding*.
This feature is common to all solvers, and is realized by following the same process.

Each Zero-crossing Block defines one of these functions, noted *g(t)*.

Generally, the feature only finds roots of odd multiplicity, corresponding to changes
in sign of *g(t)*. If a user root function has a root of even multiplicity (no sign change), it will probably be missed. If such a root is desired, the user should reformulate the root function so that it changes sign at the desired root.

The basic scheme used is to check for sign changes of any *g(t)* over each time step taken, and then (when a sign change is found) to home in on the root (or roots) with a modified secant method.

After suitable checking and adjusting has been done, the roots are to be sought within
*[t _{lo}, t_{hi}]*
. A loop is entered to locate the
root to within a rather tight tolerance, given by the

*unit roudoff*, the

*current time*and the

*step size*.

We then determine which root function is more likely to have its roots occur first by comparing the secant method values, and set a new value
*t _{mid}*
and restrain the research interval to either

*[t*or

_{lo}, t_{mid}]*[t*, following which does the sign change occur in.

_{mid}, t_{hi}]Since the tolerance depends on the step size, the smaller it is, the more accurate the homing in will be.

### Examples and Overhead

Simple example of a Sine crossing zero several times:

// Import the diagram and set the ending time loadScicos(); loadXcosLibs(); importXcosDiagram("SCI/modules/xcos/demos/Threshold_ZeroCrossing.zcos"); // Start the timer, launch the simulation and display time tic(); try xcos_simulate(scs_m, 4); catch disp(lasterror()); end t = toc(); disp(t, "Time for LSodar:");

The blue bars represent the "positive to negative" zero crossings, while the red ones are for "negative to positive".

Now, in the two following scripts, we test the computational overhead of the rootfinding with *LSodar*:

First, a Sine function that crosses zero every π period: Open the script

Time with rootfinding: 15.021 Time without rootfinding: 10.573

Then, a simple straight line that crosses zero only once, in the middle of the interval: Open the script

Time with rootfinding: 0.114 Time without rootfinding: 0.09

Following the number of zero crossings, the aspect of the function near these crossings, the tolerances, ..., the computational overhead ranges between 25% and 45%.

### See Also

### Bibliography

Report an issue | ||

<< DDaskr | Solvers | Comparisons >> |