Scilab Website | Contribute with GitLab | Mailing list archives | ATOMS toolboxes
Scilab Online Help
5.5.1 - 日本語

Change language to:
English - Français - Português - Русский

Please note that the recommended version of Scilab is 2024.1.0. This page might be outdated.
See the recommended documentation of this function

Scilabヘルプ >> Xcos > palettes > Discrete time systems palette > DELAYV_f


Variable delay

Block Screenshot


The Variable Delay block can be used to simulate a variable time delay between an action and its effect. The block might be used, for example, to model a system with a pipe where the speed of a motor pumping fluid in the pipe is variable.

The block accepts two inputs and one output: the first input is the signal u(t) that passes through the block (data input); the second input is the variable time delay τ(t).

The ouput activation ports trigger every "Max delay"/length("Register initial condition").

The input activation port and the first ouput activation port are meant to be linked, to get the variations of the input.

The final delay is: τ(t) + "Max delay"/length("Register initial condition").

Dialog box

  • Number of inputs

    Set the vector size of the first regular input and the vector size of the regular output port.

    Properties : Type 'vec' of size 1.

  • Register initial condition

    Set the length and the initial conditions of the register.

    Properties : Type 'vec' of size -1.

  • Max delay

    It defines the largest value the time delay input can have.The value cannot be negative.

    Properties : Type 'vec' of size 1.

Default properties

  • always active: no

  • direct-feedthrough: yes

  • zero-crossing: no

  • mode: no

  • regular inputs:

    - port 1 : size [1,1] / type 1

    - port 2 : size [1,1] / type 1

  • regular outputs:

    - port 1 : size [1,1] / type 1

  • number/sizes of activation inputs: 1

  • number/sizes of activation outputs: 2

  • continuous-time state: no

  • discrete-time state: yes

  • object discrete-time state: no

  • name of computational function: delayv

Interfacing function

  • SCI/modules/scicos_blocks/macros/Linear/DELAYV_f.sci

Computational function

  • SCI/modules/scicos_blocks/src/fortran/delayv.f (Type 1)

Variable delay example

In this example, the sine function (in black) est delayed alternatively by 0 and 1 second. The amplitude of the GENSQR_f block is fixed at 2, but the "Max delay" parameter of the DELAVV_f block restrains that value to 1. We see that with every time GENSQR_f is activated (every 2*π seconds), the delay changes: the curves overlap (delay=0) and are shifted (delay=1) in turn.

Report an issue
<< Discrete_pal Discrete time systems palette DELAY_f >>

Copyright (c) 2022-2024 (Dassault Systèmes)
Copyright (c) 2017-2022 (ESI Group)
Copyright (c) 2011-2017 (Scilab Enterprises)
Copyright (c) 1989-2012 (INRIA)
Copyright (c) 1989-2007 (ENPC)
with contributors
Last updated:
Thu Oct 02 13:58:29 CEST 2014