Please note that the recommended version of Scilab is 2025.0.0. This page might be outdated.
See the recommended documentation of this function
BITCLEAR
Clear a Bit
Block Screenshot
Contents
Description
This block sets to 0
the specified bit of its input.
The user gives the bit index in the field Index of Bit
with index 0
, as that of the least significant bit.The operation can be
summarized by this expression:
Sortie = Entrée ∧ Masque
i.e. a bitwise AND
between Input
and
Mask
, an integer of the same length as the input with a value
0
for the bit to clear and a value 1
for the other bits.
Data types
The block supports the following types :
Input : scalar. All Scilab's integer type (Data type parameter).
Output : same type and dimensions than input.
Parameters
Data Type (3=int32 4=int16 5=int8 ...)
It indicates the integer type of the input (output) data : between 3 and 8.
Properties : Type 'vec' of size 1.
Index of Bit (0 is least significant)
It indicate the index of the bit to clear. The index must be, when the type is:
int32 or uint32: positive and less than 32.
int16 or uint16: positive and less than 16.
int8 or uint8: positive and less than 8.
Properties : Type 'vec' of size 1.
Default properties
always active: no
direct-feedthrough: yes
zero-crossing: no
mode: no
regular inputs:
- port 1 : size [1,1] / type 3
regular outputs:
- port 1 : size [1,1] / type 3
number/sizes of activation inputs: 0
number/sizes of activation outputs: 0
continuous-time state: no
discrete-time state: no
object discrete-time state: no
name of computational function: bit_clear_32
Example
Below a simple use case of the block.
Interfacing function
SCI/modules/scicos_blocks/macros/IntegerOp/BITCLEAR.sci
Computational function
SCI/modules/scicos_blocks/src/c/bit_clear_32.c
SCI/modules/scicos_blocks/src/c/bit_clear_16.c
SCI/modules/scicos_blocks/src/c/bit_clear_8.c
See also
- BITSET — Set a Bit
- EXTRACTBITS — Bits Extraction
- LOGICAL_OP — Logical operation
Report an issue | ||
<< Integer_pal | Integer palette | BITSET >> |