Please note that the recommended version of Scilab is 2024.1.0. This page might be outdated.
See the recommended documentation of this function
WRITEAU_f
Write AU sound file
Block Screenshot
Contents
Description
This block writes a sound file specified by the string *.au file. The data should be arranged with one channel per column. Amplitude values outside the range [-1,+1] are clipped prior to writing. auwrite supports multichannel data for 8-bit mu-law and 8- and 16-bit linear formats.
Parameters
Buffer size
To improve efficiency it is possible to buffer the input data. read on the file is only done after each Buffer size call to the block.
Properties : Type 'vec' of size 1
Swap mode 0/1
WithSwap mode=1 the file is supposed to be coded in "little endian IEEE format" and data are swaped if necessary to match the IEEE format of the processor. IfSwap mode=0 then automatic bytes swap is disabled.
Properties : Type 'vec' of size 1
Default properties
always active: no
direct-feedthrough: yes
zero-crossing: no
mode: no
regular inputs:
- port 1 : size [1,1] / type 1
number/sizes of activation inputs: 1
number/sizes of activation outputs: 0
continuous-time state: no
discrete-time state: yes
object discrete-time state: no
name of computational function: writeau
Interfacing function
SCI/modules/scicos_blocks/macros/Sinks/WRITEAU_f.sci
Computational function
SCI/modules/scicos_blocks/src/c/writeau.c (Type 2)
Example
Report an issue | ||
<< TRASH_f | Sinks palette | WRITEC_f >> |