SRFLIPFLOP

Block Screenshot

Contents

• SR flip-flop

• • Palette

  • Description

  • Data types

  • Dialog box

  • Default properties

  • Example

  • Interfacing function

  • See also

Palette

• Integer palette

Description

This block describes the simplest and the most fundamental latch the SR flip flop. The output Q depends of the state of the inputs S and R. The output !Q is the logical negation of Q

• If S (Set) is pulsed high while R is held low, then the Q output is forced high, and stays high when S returns low.

• if R (Reset) is pulsed high while S is held low, then the Q output is forced low, and stays low when R returns low.

• When S and R are low, Q(t) takes the value of the previous output state Q(t-1).

• When S and R are both high, both Q and !Q take the low or high values; the state is unstable. Practically this case is forbidden.

The user can set the initial output state with Initial Value parameter.

This block is almost used as a memory

The truth table of this block is:

				Hold
				Reset
				Set
				Forbidden state

where U stands for "Unknown".

Data types

The block supports the following types :

• Inputs:

  • R: scalar. Scilab's int8 data type only.

  • S: scalar. Scilab's int8 data type only.

  A positive input is considered as logical 1, a negative or a null input as logical 0.

• Outputs: scalar. Scilab's int8 data type.

Dialog box

• Initial Value

  Initial Value of the state Q. It must be int8 data type.

  Properties : Type 'vec' of size 1.

Default properties

• always active: no

• direct-feedthrough: yes

• zero-crossing: no

• mode: no

• regular inputs:

  - port 1 : size [1,1] / type 5

  - port 2 : size [1,1] / type 5

• regular outputs:

  - port 1 : size [1,1] / type 5

  - port 2 : size [1,1] / type 5

• number/sizes of activation inputs: 0

• number/sizes of activation outputs: 0

• continuous-time state: no

• discrete-time state: no

• object discrete-time state: no

• name of computational function: csuper

Example

The following example presents a typical anti-bouncing application of the SR flipflop. The output graph shows the memory effect of the flipflop.

Interfacing function

• SCI/modules/scicos_blocks/macros/IntegerOp/SRFLIPFLOP.sci

See also

• DLATCH — D latch flip-flop
• DFLIPFLOP — D flip-flop
• JKFLIPFLOP — JK flip-flop