Scilab Website | Contribute with GitLab | Mailing list archives | ATOMS toolboxes
Scilab Online Help
5.5.2 - Português

Change language to:
English - Français - 日本語 - Русский

Please note that the recommended version of Scilab is 2024.1.0. This page might be outdated.
See the recommended documentation of this function

Ajuda do Scilab >> Xcos > palettes > Integer palette > SRFLIPFLOP


SR flip-flop

Block Screenshot


This block describes the simplest and the most fundamental latch the SR flip flop. The output Q depends of the state of the inputs S and R. The output !Q is the logical negation of Q

  • If S (Set) is pulsed high while R is held low, then the Q output is forced high, and stays high when S returns low.

  • if R (Reset) is pulsed high while S is held low, then the Q output is forced low, and stays low when R returns low.

  • When S and R are low, Q(t) takes the value of the previous output state Q(t-1).

  • When S and R are both high, both Q and !Q take the low or high values; the state is unstable. Practically this case is forbidden.

The user can set the initial output state with Initial Value parameter.

This block is almost used as a memory

The truth table of this block is:

Forbidden state

where U stands for "Unknown".

Data types

The block supports the following types :

  • Inputs:

    • R: scalar. Scilab's int8 data type only.

    • S: scalar. Scilab's int8 data type only.

    A positive input is considered as logical 1, a negative or a null input as logical 0.

  • Outputs: scalar. Scilab's int8 data type.

Dialog box

  • Initial Value

    Initial Value of the state Q. It must be int8 data type.

    Properties : Type 'vec' of size 1.

Default properties

  • always active: no

  • direct-feedthrough: yes

  • zero-crossing: no

  • mode: no

  • regular inputs:

    - port 1 : size [1,1] / type 5

    - port 2 : size [1,1] / type 5

  • regular outputs:

    - port 1 : size [1,1] / type 5

    - port 2 : size [1,1] / type 5

  • number/sizes of activation inputs: 0

  • number/sizes of activation outputs: 0

  • continuous-time state: no

  • discrete-time state: no

  • object discrete-time state: no

  • name of computational function: csuper


The following example presents a typical anti-bouncing application of the SR flipflop. The output graph shows the memory effect of the flipflop.

Interfacing function

  • SCI/modules/scicos_blocks/macros/IntegerOp/SRFLIPFLOP.sci

See also

Report an issue
<< SHIFT Integer palette Lookup tables palette >>

Copyright (c) 2022-2024 (Dassault Systèmes)
Copyright (c) 2017-2022 (ESI Group)
Copyright (c) 2011-2017 (Scilab Enterprises)
Copyright (c) 1989-2012 (INRIA)
Copyright (c) 1989-2007 (ENPC)
with contributors
Last updated:
Wed Apr 01 10:24:26 CEST 2015